Operating Manual
Matrix
Copyright Silca 2012
17
Fig. 21
8.4 TRACER POINT SPRING
Fig. 22
The machine comes with a rapid system for enabling or
disabling the tracer point spring.
•
To enable the tracer point spring function.
Turn/push the cam (N) all the way anti-clockwise.
•
To disable the tracer point spring function.
Turn/push the cam (N) all the way clockwise.
Enable the tracer point spring:
-
to cut dimple and tubular keys.
Disable the tracer point spring:
-
for calibration operations.
-
to cut keys with laser cuts and vehicle keys in
general.