8
Copyright Silca 2006
SBB
Operating Manual - English
6
USING THE MACHINE
This chapter describes all the operations required to memorize, erase, or add keys to the centralized
immobilizer unit by connecting SBB to the vehicle diagnostics input.
6.1
START-UP
When the machine is turned on the display shows the logo:
After a few seconds the following message appears:
The wording
“Update: XXXXXXX”
give the level of updating for the program and database.
The wording “
Ver (SW) XX.XX.XX
” indicates the software version.
The wording “
Ver (DB) XX.XX.XX
” indicates the make and model Database version on the machine.
The wording
“S.N.: XXXXXXXXXXXXX”
give the machine serial number.
Check that the serial number shown on the display is the same as that on the document "USER’S
AGREEMENT" and on the label attached to the back of the machine.
Press
F1
to continue
.
6.2
PASSWORD
When selection has been made, the following message appears:
To use the machine enter the password issued by the supplier/dealer, comprising
8 numerical characters
.
- enter the password and press
ENTER
.
CORRECT PASSWORD
If the password is correct, the message below appears:
After a few seconds the program enters the main menu.
S.N. : XXXXXXXXXXXXX
Ver. (SW): XXX.XX.XXX
Ver. (DB): XX.XX
Update : XXXXXXX
(F1) to continue
INSERT PASSWORD:
XXXXXXXX
RIGHT PASSWORD
®