WV58MR
Installation English
WV58MR · Date
07.10.2020 · Art.
No.
88752 · Mod.
status
047/20
20
4.2 Electrical Installation
Destruction of parts of equipment and loss of regulation control
`
All lines for connecting the absolute encoder must be shielded.
`
Do not disconnect or close live connections.
`
Perform wiring work in the de-energized state only.
`
Use strands with suitable ferrules.
`
Prior to switching on check all mains and plug connections.
`
Switch on operating voltage together with downstream electronics (e.
g., control unit).
Basically, all connections are protected against external interference.
Choose a place of operation that excludes inductive or capacitive inter-
ference influences on the absolute encoder. When mounting the system
keep a maximum possible distance from lines loaded with interference. If
necessary, provide additional installations including screening shields or
metallized housings.
Admissible power input
Supply for the absolute encoder shall be sized sufficiently. The voltage
values are a function of the device design and can be referred to in the
technical data in chapter
Pin assignment E1
•
open cable end
•
Encoder connected internally
Color
Designation
white
CAN_GND
brown +UB
green
GND
yellow CAN_H
gray
CAN_L
WARNING
