MSA510/1
Safety information English
MSA510/1 · Date
04.05.2016 · Art.
No.
83520 · Mod.
status
38/16
24
Important operating information that may facilitate operation or many
cause unplanned device reactions if disregarded including possible prop-
erty damage.
Signal symbols
2.3 Target group
Installation instructions are intended for the configuration, commission-
ing and mounting personnel of plant or machine manufacturers who pos-
sess special expertise in drive technology. This group of operators needs
profound knowledge of a magnetic sensor's necessary connections and its
integration into a complete machinery.
Insufficiently qualified personnel
Insufficiently qualified personnel cause personal injury, serious damage to
machinery or magnetic sensor.
`
Configuration, commissioning, mounting and maintenance by trained
expert personnel only.
`
This personnel must be able to recognize dangers that might arise
from mechanical, electrical or electronic equipment.
Qualified personnel are persons who
•
are familiar with the safety guidelines of the electrical and automation
technologies when performing configuration tasks;
•
are authorized to commission, earth and label circuits and devices/
systems in accordance with the safety standards.
2.4 Basic safety information
Danger of explosion
`
Do not use the magnetic sensor in explosive zones.
Movable parts
Bruising, rubbing, abrasing, seizing of extremities or clothes by touching
during operation any movable parts as for example sensor.
`
Install protective facilities to prevent people from getting access.
NOTICE
WARNING
DANGER
WARNING
Summary of Contents for MSA510/1
Page 42: ...MSA510 1 42 ...
Page 43: ...MSA510 1 43 ...
