Siklu EtherHaul, Operation And Maintenance Manual

Page: 28 / 156

EtherHaul Operation, Administration and Maintenance Manual
Page 28
4 Radio Configuration and Monitoring
The radio link parameters and radio link monitoring are managed in the Radio page.
This chapter includes the following topics:

Settings

Advanced Settings

Maintenance

Modulation Table

Statistics

CLI commands
4.1 Settings
Figure 4-1 Radio Page: Settings
This section allows configuring the following parameters:

Channel Bandwidth [MHz] – 250 or 500MHz (default is 500MHz).
Note that 250MHz support depends on product’s specs.

Tx Frequency [MHz] – transmit frequency.

Rx Frequency [MHz] – R/O field, updated based on Tx frequency.
o
For FDD systems – fixed 10GHz spacing between Tx and Rx frequencies.
o
For TDD systems – identical Tx and Rx frequencies.

Tx Power [dBm] – ODU’s transmit power. Default is the max power, based on
product’s specs. Minimum configurable Tx power is -35dBm (note that actual
minimum Tx power is based on product’s specs).