EH-5500FD Installation Manual
Page 37
3.3.4
Reboot
Separate buttons for local and remote reboot. The system will reboot and come up after
initialization (~120 seconds).
Note that any unsaved changes will be lost.
3.3.5
Copy To Remote
You can find the
Copy To Remote
button next to some configuration parameters or
sections. This function copies configuration to remote system based on the changes on
the local system.
Figure 3-4 Copy To-Remote icon
Matching configuration may be of two types:
Identical configuration – exactly same configuration will be copied from the
local to remote system. It can be found for parameters that normally
requires identical configuration for both local and remote units.
For example, Encryption configuration.
Matching configuration – for parameters that require matching but
opposite configuration.
3.4
Quick Configuration Wizard
Use the Quick Configuration wizard to configure the basic system parameters. It holds
the basic minimal configuration required to start using the link.
The Quick Configuration wizard should be used for the initial system setup after
installation. For monitoring and advanced configuration, please refer to the dedicated
configuration pages of the Web-Based Management.
To access the Quick Configuration wizard, go to the
Quick Config
page.
3.4.1
Quick Configuration: Step 1
– System
Figure 3-5 Quick Config Page: Step 1 - System
