SIKA VTY10K5, Operating Manual

Page: 22 / 28

Disassembly and Disposal VTY
- 22 - © SIKA • Ea7900_VTY • 05/2022
6 Disassembly and Disposal
CAUTION
Never remove the device from a plant in operation.

Make sure that the plant is shut down professionally.
Before disassembly
Prior to disassembly, ensure that

the equipment is switched off and is in a safe and de-energised state.

the equipment is depressurised and has cooled down.
Disassembly

Remove the electrical connectors.

Remove the flow sensor.
Disposal
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU (WEEE)*, the device
must be disposed of separately as electrical and electronic waste.
NO HOUSEHOLD WASTE
The device consists of various different materials. It must not be disposed of with
household waste.

Take the device to your local recycling plant
or

send the device back to your supplier or to SIKA.
* WEEE reg. no.: DE 25976360
7 Materials in Contact With Media
Type VTY10MA VTY10K5 VTY15 VTY20 VTY25
Pipe section Brass CW617N
PPE+PS
*1 Brass
CW617N-DW
Brass CW617N
or stainless
steel 1.4308
Brass
CW617N-
DW
Turbine cage
PPE+PS
*1 -/-
PPE+PS
*1
Rotor
PPE+PS
*1
Magnet Hard ferrite
Shaft Stainless steel / hard metal
Axial bearing Sapphire
Radial bearing PEEK Victrex™
O ring -/- EPDM -/-
*1) PPE+PS Noryl™ 30% glass fibre reinforced.