Disassembly and disposal
i
ndu
Q
®
- Series VMM
- 50 -
© SIKA
•
Ba_VMM_us
•
09/2018
9.3
Storage
The device is to be safeguarded against dampness, dirt, impact and damage.
Store the VMM dry and dust free.
Prevent direct, permanent solar radiation and heat.
Prevent external loads on the unit.
The permissible storage temperatures are -4…140 °F.
10
Disassembly and disposal
CAUTION! Risk of injury!
Never remove the device from a plant in operation.
Make sure that the plant is shut down professionally.
Before disassembly:
Prior to disassembly, ensure that
the equipment is switched off and is in a safe and de-energized state.
the equipment is depressurized and has cooled down.
Disassembly:
Remove the electrical connectors.
Remove the VMM using suitable tools.
Disposal:
Compliant with the Directives 2011/65/EU (RoHS) and 2012/19/EU
(WEEE)
*, the device must
be disposed of separately as electrical and electronic waste.
No household waste!
The VMM consists of various different materials. It should not be disposed of with house-
hold waste.
Comply with the relevant regulations of your country when disposing the units.
Take the VMM to your local recycling plant
or
send the VMM back to your supplier or to SIKA.
* WEEE reg. no.: DE
25976360
