SIIG SC-SAE312-S3 Quick Installation Manual Download Page 1

  1

eSATA II PCIe Pro RAID
Quick Installation Guide

04-0396B

Introducing the 

eSATA II PCIe Pro RAID

The 

eSATA II PCIe Pro RAID 

is an ultra high-speed two

channel Serial ATA Generation II RAID controller for use

in PCI Express enabled systems.

Features and Benefits

Compliant with PCI Express Base Specification 1.0a

Compliant with Serial ATA 1.0 specifications with

support for full complement of SATA II optional

features

PCI Express 1-lane (x1) SATA II adapter works with

PCI Express slots with different lane width

Installs in any available PCI Express slot and

supports data transfer rates up to 3.0Gbps (300MBps)

Supports Native Command Queuing (NCQ),

Non-zero offsets NCQ, and Out-of-order data

delivery NCQ

Independent command fetch, scatter/gather, and

command execution

Supports RAID 0 (striping) and RAID 1 (mirroring)

for speed and data protection respectively

System Requirements

PCI Express enabled system with one available PCI

Express slot

Windows 2000/XP (32-/64-bit)/Server 2003

(32-/64-bit)/Vista (32-/64-bit)

2 External SATA drives

Summary of Contents for SC-SAE312-S3





























Reviews: