background image

CyberPro PCI 4S is a trademark of SIIG, Inc.  SIIG and the SIIG logo are registered trademarks of SIIG,

Inc. Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.  Pentium is a registered trademark

of Intel Corporation.  Other names used in this publication are for identification only and may be

trademarks of their respective companies.

October, 2009                    Copyright 

©

  2009 by SIIG, Inc. All rights reserved.

About SIIG, Inc.

Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer

of I/O connectivity products, including PCI & ISA serial and parallel

ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b),

networking, sound cards, and other accessories.  SIIG is the premier

one-stop source of upgrades.
SIIG products offer comprehensive user manuals, many user-friendly

features, and are backed by an extensive manufacturer warranty.

High-quality control standards are evident by the overall ease of

installation and compatibility of our products, as well as one of the

lowest defective return rates in the industry.  SIIG products can be

found in computer retail stores, mail order catalogs, through major

distributors, system integrators, and VARs in the Americas and the

UK, and through e-commerce sites.

PRODUCT NAME

CyberPro PCI 4S

FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS

B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules.  Operation is
subject to the following two conditions:  (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE

SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone:  510-657-8688

Summary of Contents for CyberPro PCI 4S













Reviews: