SIIG Cyber PCI I/O Quick Installation Manual Download Page 1

1

Cyber PCI I/O
Quick Installation Guide

04-0201C

Introducing the Cyber PCI I/O

The Cyber PCI I/O high-speed serial and parallel I/O card family
provides a complete solution for serial and parallel device
connections.  It provides 16550/16650/16850 UART serial port(s)
which supports data transfer rates up to 920Kbps and ECP/EPP
parallel port(s) which supports data transfer rates up to 2MB/sec.
Since this installation guide is written for all Cyber PCI I/O boards,
some features on this installation guide might not be present on the
model you bought.  Please only refer to the features that apply to
your board.

Features and Benefits

   Conforms to PCI v2.1 Plug and Play

   Full support for DOS- and Windows-based software

   Improves I/O access speed up to 8 times faster than existing

ISA-bus serial ports.  Reduces CPU load and  improves system
performance dramatically

   IRQ sharing feature eliminates IRQ conflicts

Serial interface:

   High-speed 16550/16650/16850 UART serial port (9-pin)

supports baud rates up to 920Kbps.  Works with 56K V.90
external modems, ISDN terminal adapters, PDAs, digital
cameras, label printers and other serial port devices

   Built-in 16/32/128-byte FIFO buffers dramatically increase

data transmit/receive speed, especially under Windows
multitasking environment

Parallel interface:
•   Conforms to IEEE 1284-1994 parallel port standard
•   High-speed parallel port supports various types of parallel

port devices including removable cartridge drives, CD-R/
RWs, printers, SuperDisk

TM

 LS-120 drives, scanners and more

•   Supports EPP, ECP(PIO mode), Bi-directional Parallel Port

(BPP) and Standard Parallel Port (SPP) modes

Summary of Contents for Cyber PCI I/O









Reviews: