3
PANEL DESCRIPTIONS
Front Panel
1.
Output Resolution Button: Select output resolution
2.
Label Button: Window’s label ON/OFF
3.
Custom Layout 1-8: Save custom layout button
4.
IR Sensor: IR sensor for receiving the IR commands from IR remote
5.
Default Layout mode A: Select default layout (
) or custom layout
6.
Default Layout mode B: Select default layout (
,
,
,
)
7.
Input 1-4 Select Button: Select input source
Rear Panel
8.
Power Switch: Power On/Off
9.
RS-232: RS-232 control port
10.
+12V DC: Connect to the +12VDC power supply unit.
11.
Dip Switch: Switch the firmware update mode or factory reset mode (Switch ON)
12.
Device ID: To identify between units
13.
Mini-USB: For firmware update
14.
Ethernet: Ethernet control port.
15.
Outputs: 2 SDI outputs
16.
Outputs: DVI output