6-24
6.5.3 Line Spacing Commands
ESC '0'
Set 1/8-inch Line Spacing
Code 1BH
30H
Function Sets the line spacing amount to 1/8 of an inch (26 dots lines).
If the line buffer contains data and the line spacing amount is smaller than the character height,
the data in the buffer is printed and line feeding is performed by the character height.
Default
34 dots lines
Printer initial state after power-on can be changed by Set default/Set test print header (DC2
'i')command.
ESC '2'
Set 1/6-inch Line Spacing
Code 1BH
32H
Function Sets the line spacing to 1/6 of an inch (34 dots lines).
If the line buffer contains data and the line spacing amount is smaller than the character height,
the data in the buffer is printed and line feeding is performed by the character height.
Default
34 dots lines
Printer initial state after power-on can be changed by Set default/Set test print header (DC2 'i')
command.
ESC '3' n
Set n-dot-line Line Spacing
Code
1BH 33H n
0
n
255
Function Sets line spacing.
The line spacing is set to n dot lines.
If the line buffer contains data and the line spacing amount is smaller than the character height,
the data in the buffer is printed and line feeding is performed by the character height.
Default
34 dots lines
Printer initial state after power-on can be changed by Set default/Set test print header (DC2 'i')
command.
Summary of Contents for DPU-S445 SERIES
