Instruction Manual StackGuard 2 System
20
10198E/3
The display...
Means
Remarks
−
Status list
−
No fault
or
Fault
Current 1 F
Temp W
Measurement 23
Moisture 0
Dirt 0
The status list indicates
the momentary state of the
fault monitoring system.
The entry menu contains a
summary statement,
“Fault“ or “No fault“. The
following information is
given:
1. Fault description
2. State
0 (no fault)
W (warning) or
F (fault) or
P (prioritized fault) or
Number (fault is
suppressed).
Press the
key to go
directly to the fault
message with the highest
priority. Afterwards go
through the rest of the
list with
/
.
MR4: 0.000- 10.00
MR1: 0.000- 100.0
The measuring ranges
selected for current output
1 (1st line) and 2 (2
nd
line)
are displayed.
In accordance with the
configuration.
4.2.4
Display of malfunctions
The display...
Means that…
So you should …
** Warning **
...
(The “Warning“
message alternates
with the reading
display).
…a relay contact is
switched in accordance
with the configuration.
…when the cause of the
warning has ceased to
occur, the warning
message is extinguished.
Malfunction displays
in normal operation