Servicing
Instruction Manual OilGuard 2 Ex
13003E/3
83
9.10
Replacing the inlet pipe on the KPFLJC PVDF (short or
long)
WORKSTEP
ADDITIONAL INFO / IMAGES
1.
Stop the sample feed.
2.
Remove the sample feed from the inlet
pipe (A).
3.
Remove the lock nut (B) by turning counter-
clockwise (bayonet lock) and pull out the inlet
pipe (A).
This measuring cell is available with a
long or short inlet pipe. This example uses a
long inlet pipe. There is no difference in han-
dling here.
4.
Insert the new inlet pipe (A) and fix in place
with the lock nut.
5.
Reattach the sample feed.
