Instruction Manual ColorPlus 2
Mounting
36
13045E/3
4.5
Connecting the cooling water (optional)
The photometer must be equipped with a cooling system.
WORKSTEP
ADDITIONAL INFO / IMAGES
Connect the inlet (A) and outlet (B) to a water
circuit.
Conventional silicone hoses for nipple diame-
ters of 9.5 mm can be used here.
Ensure that the cooling water flows from
bottom to top. There must therefore be suffi-
cient pressure available to ensure the necessary
flow of at least 0.2 l/min.
4.6
Mounting customer-specific measuring cells
Please note the corresponding drawing for mounting customer-specific measuring cells.
