Instruction Manual ScrubberGuard
Servicing
78
14830E/1
9.2.5
Replacing the draw springs on the ScrubberGuard
WARNING!
Injuries due to ejected suspension.
The draw springs are under tension and can be ejected if not removed in a controlled man-
ner.
Always keep hold of the draw springs during removal.
Always remove one draw spring at a time only.
CAUTION!
Damage to the system due to simultaneous removal of several suspensions.
Only one draw spring may be removed from the frame at a time. This ensures that the
spring-mounted parts remain stable and are not damaged.
The following describes the replacement of the draw springs:
WORKSTEP
ADDITIONAL INFO / IMAGES
1.
Remove the casing on the system so that the
draw springs (circles) are easily accessible.
2.
Remove the fastening screws (arrows) and
then remove the draw springs.
3.
Mount the new draw springs and fasten in
place with the screws.
4.
Repeat this process on all draw springs.
Summary of Contents for AquaScat SG
Page 6: ......
