INSTRUCTION MANUAL AquaScat 2
Servicing
60
11778E/1
8.7.
Clean the optics
Figure 17: AquaScat 2 WTM A optics unit in adjust-
ment position
Figure 18: AquaScat 2 WTM/HT
Transmitter
Head of the automatic checking unit
Stop for idle position of the check-
ing unit
Air filter
Fastening plate for the stop of the
checking unit
Aperture assembly
The following describes cleaning the optics:
WORKSTEP
PROCEDURE
1.
Interrupt sample supply.
2.
Interrupt the service voltage
to the photometer.
Section 5
3.
Remove the optics unit of
the photometer and fasten
onto the docking station.
Section 4.4
