Touch to enter user manual (figure 3) which has brief instructions. Touch return to figure 1 .
Instructions:
figure 1
figure 2
1. Connect the strip to the controller.
2. Download and install free software
at Apple/Android store into your iPhone / iPod / iPad/
Android device. Make sure you choose
access point and your device connects to WI-FI
network. Launch
application. If the connection failed, check the WI-FI connection, then
restart PlayLED. If no prompt pops out, it means the iPhone / iPod / iPad / Android device and the
controller are connected successfully.
3. After the success of the connection enter figure 1 interface. Under
use the scroll wheel to
select the Chip (including LPD1109, SM16716, LPD6803, LPD8803, WS2801, TM1803,Tm1809-low
speed mode) for your digital ribbon, under
select the ribbon's Length (2M-100M,
10 pixels/meter). Every time when you change the
or
, a prompt will pop out to let
you confirm and save the settings, as shown in figure 2.
PlayLED
PlayLED
PlayLED
IC Model
Length
IC Model
Length
figure 3
4. Touch
, to enter the Static model: you can choose your favourite color by Hand,
G-Sensor or random choice(figure 4,5,6), then whole strip will light up the color you have picked
instantly.
5. Touch
to enter Dynamic mode (figure 7). Slide your finger on the screen, and the
drag tail chasing light color will follow the trace of your finger.
Static Color
Dynamic Color
6.Touch
, enter mode selection(figure 8)
a) 5 kinds of dynamic modes are available under
:(1. Gradual change 2. running
water chasing light 3. a segment chasing light 4. drag tail chasing light 5. two
sections drag tail chasing light)
b) Color effect of single color or gradual change color can be selected under
.
c) Flow direction of light can be selected under
:(1.
：
move to right, 2.
：
move to left, 3.
：
cross move, 4.
：
shrink move, 5. extend and shrink move)
。
d) Can adjust freely the effect and direction under mode 2,3,4 and 5. Mode 1 is unique: When you
choose single color under
, the light of strip will be gradual changed from dark to light and
then light to dark.
and
don't work. When you choose gradual change color
of
, right direction is mix gradual change, other direction is running water change, and
the changing speed is adjustable, while brightness doesn't work.
Mode Select
Mode
Effect
Direction
Effect
Direction
Brightness
Effect
P2
Tel:+86-755-27608650 Fax:+86-755-27608651 [email protected]
Yijia Industrial Park, Fuqian Road, Guanlan Town, Baoan, Shenzhen, Guangdong, China
www.signcomplex.com
Signcomplex
we bring innovation and give impression