1
Double Bowl Undermount Vantiy Installation Instructions
DOUBLE BOWL UNDERMOUNT VANITY
GETTING STARTED
TOOLS AND MATERIALS:
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing bathroom fixtures and
plumbing. Signature Hardware accepts no liability for any
damage to the floor, walls, plumbing, vanity cabinet, sink,
counter top, or personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the vanity for damage. If any
damage is found, contact our Customer Relations team
at 1-866-855-2284.
*not included
Ensure that you have gathered all the required
materials that are needed for the installation.
Ensure that your bathroom floor is adequately
supported, and the finished floor is level.
Ensure that there is adequate support behind the
bathroom wall before installation.
PLANNING
Use the vanity’s PDF specification sheet as a reference
when planning your layout. The specification sheet can
be found and downloaded from the product page on
our website.
Because the vanity specification measurements are
approximate and slight variations may occur, we highly
recommend performing any rough-in procedures with
the vanity on site.
Tape Measure*
Marker*
Drill*
Screwdriver*
Stud Finder
Level
Neutral Cure
Silicone Sealant
Damp Cloth
Wood Shims
NEVER LIFT THE VANITY TOP FLAT
NEVER CARRY THE VANITY TOP FLAT
