Signametrics
60
5.7 Error Codes
Operation of the DMM may be impaired; therefore it should be aborted following an Error. Use the
SCANErrString()
function, to retrieve the string describing the error. There definitions are included in
the SMX4032.h file in the release package installed on your computer.
SCAN_OKAY_4030
0
//
no
error
SCAN_E_INIT_4030
-1
// Error: Scanne not initialized
SCAN_E_IO_4030
-2
// Error: SCAN not responding to basic I/O operations
NOT_FOUND_4030
-3
// Error: SCAN Not found on PCI bus
ERR_HW_INIT_4030
-4
// Error: can't access Scanner H/W
ID_HW_ERR_4030
-5
// Error: Can't read ID from SCAN
GUARD_COM_4030
-6
// Error: Communication error with SCAN uP
TIMEOUT_4030
-7
// Error: A communication process time-out
GUARD_XING_4030
-8
// Error: Optical Guard crossing is broken
CONTROLR_COM_4030
-9
// Error: Microcontroller communication error
OVERRUN_4030
-10
// Error: General Communication error
FRAME_4030
-11
// Error: Commincation Frame error
RCV_FIFO_4030
-12
// Error: Communication FIFO Receiver error
PARITY_4030
-13
// Error: Communication parity error
CANT_OPEN_PCI_4030
-14
// Error: Can't open Scanner PCI device. May be in use
PCI_ITEMS_4030
-15
// Error: SCANNER Driver does not have all PCI items
5.8 Warning Codes
Following a warning codes. The SMX4030 and SMX4032 will continue to run with the exception of the
fault indicated by the warning code. Use the
SCANErrString()
function, to retrieve the string describing
the warning. This string may be used to notify the user. Based on it, an action may be taken to correct the
source of the warning. There definitions are included in the SMX4032.h file in the release package
installed on your computer.
TEST_CONNECT_4030
101
// Warning: Test Connector is required
OPEN_RELAY_4030
102
//
Warning: Relay open fail
SHORT_RELAY_4030
103
//
Warning:
Relay short fail (both contacts)
BOUNCE_RELAY_4030
104
// Warning: Relay accessive bounce
STUCK_OPEN_4030
105
//
Warning: Relay stuck open fail
LOW_ACTUATION_4030
106
// Warning: Insufficinte actuation time
LOW_RELEASE_4030
107
// Warning: Insufficinte release time
STUCK_SHORT_4030
108
// Warning: Relay stuck shorted
WRONG_CONFIG_4030
109
// Warning: Invalid Configuration
TYPE_PARAM_4030
110
//
Warning:
Wrong Parameter for Scanner type
SCAN_E_IS_INIT_4030
111
// Warning: Already initialized
WRONG_TYPE_4030
112
// Warning: Wrong type read from H/W
ERR_PARAMETER_4030
113
// Warning: wrong parameter value
FUNC_UNABLE_4030
114
// Warning: Function not available
NOT_ALL_INIT_4030
115
// All three cards must be initialized
ERROR_VALUE_4030
116
// Wrong error/warning value entered