4
2.
Vsound pedal controls
Top panel
•
Volume. This rotary control adjusts volume of the output.
•
Preamp. This sets the gain of the input preamplifier, allowing a gain of either 0 dB or 14 dB.
•
Response select. This footswitch is used to select the IR. The pedal can hold 10 IRs in its memory,
and the footswitch cycles round from 0 (bypass) to 10.
•
Bypass toggle. This footswitch toggles between bypass and the presently selected IR.
Front panel
•
Input. Uses a standard ¼ mono jack plug.
•
USB. This is a micro USB socket, used to connect the vsound pedal to your Mac.
•
Power input. This is standard 9 V, centre negative socket, for 5.5 x 2.1 mm plugs
•
Output. Uses a standard ¼ mono jack plug.
