Rev 1.15
SignalFire Telemetry
20
Modbus Register Remapping
The gateway allows any of the remote register data to be remapped to a single block
of registers available at the Gateway’s Modbus ID (default is 247). This is useful for
collecting a subset of register data from multiple nodes and making it readable in a
single block of registers. Up to 1500 registers can be remapped to the gateway’s Modbus ID starting
at register 5000.
To configure the remapping, first select
Modbus Register Remapping
from the
Settings
dropdown
menu.
Enter the remote Modbus ID and register address to map to each gateway register and click
Write to
GW
to remap the register(s).
The
Node Name
,
Data Type
,
Register Value
, and
Description
fields will automatically be filled in by
the gateway once the mapping is written to the gateway.
