STO 081
S-DIAS SAFETY DIGITAL OUTPUT MODULE
Page 24
04.11.2020
8
Mounting
The S-DIAS modules are designed to be mounted in the control cabinet. To mount the
modules, a DIN rail is required. The DIN rail must establish a conductive connection with the
back wall of the control cabinet. The individual S-DIAS modules are mounted on the DIN rail
as a block and secured with latches. The functional ground connection from the module to
the DIN rail is made via the grounding clamp on the back of the S-DIAS modules. The
modules must be mounted vertically with sufficient clearance between the ventilation slots of
the S-DIAS module blocks and nearby components and/or the control cabinet wall. This is
required to provide optimal cooling and air circulation so that functionality is ensured up to
the maximum operating temperature.