SIGMATEK SDI 101, Manual

Page: 29 / 30

S-DIAS SAFETY DIGITAL INPUT MODULE SDI 101
02.12.2019 Page 27
Documentation Changes
Change date Affected
page(s) Chapter Note
11.02.2014 14
15
5 Connector Layout
5.2 Applicable Connectors
Changed image
Connection capacity added
French notes added
03.03.2014 16
17
5 Connector Layout
5.1 Status LEDs
Changed image
Changed/expanded Status LEDs table
01.04.2014 20 7 Mounting Text updated
23.05.2014 10 2.3 Compatibility Added chapter
08.09.2014 14 3.5 Miscellaneous Added Standard
30.01.2015 19 6.2 Note Added note concerning connecting the S-DIAS
module while voltage is applied
26.03.2015 17 5.2 Applicable Connectors Added connections
07.05.2015 New writing: EN ISO 13849-1/-2
18.05.2015 14 3.6 Environmental Conditions Expanded vibration resistance
04.08.2015 Info Cover Translation from German added
17.12.2015 10 2.2 Safety-Relevant
Parameters Safety level added
28.04.2016 21 7 Mounting Graphics distances
13.03.2017 12 3.2 Signal Output
Specifications for Cross-
Circuit Detection Note added
17.08.2017 14
17
3.6 Environmental Conditions
5.2 Applicable Connectors
Pollution Degree
Sleeve length added
Added info regarding ultrasonically welded strands
18.10.2017 18
22
5.3 Label Field
7 Mounting
Added chapter
Graphic replaced
05.10.2018 3.2 Specifications for Cross-
Circuit Detection Signal
Outputs Note for cable capacitance and for cable resistance
added