SCP 111-2
S-DIAS SAFETY CPU MODULE
Page 32
08.09.2022
9
Mounting
The S-DIAS modules are designed for installation into the control cabinet. To mount the
modules, a DIN-rail is required. The DIN rail must establish a conductive connection with the
back wall of the control cabinet. The individual S-DIAS modules are mounted on the DIN rail
as a block and secured with latches. The functional ground connection from the module to
the DIN rail is made via the grounding lug on the back of the S-DIAS modules. The modules
must be mounted horizontally (module label up) with sufficient clearance between the
ventilation slots of the S-DIAS module blocks and nearby components and/or the control
cabinet wall. This is necessary for optimal cooling and air circulation to ensure proper function
up to the maximum operating temperature.
