manualshive.com logo in svg

SIGMATEK S-IPC, Manual, Page: 2 / 42

Share
Download
SIGMATEK S-IPC Manual Download Page 2

S-IPC INTEL

®

 ATOM DUAL CORE 

 

Page 2 

21.02.2014 

 

Contents 

 

Contents ..................................................................................................... 2

 

Technical Data ........................................................................................... 3

 

Postcodes................................................................................................... 6

 

Mechanical Dimensions (with fan and heat sink) .................................. 7

 

Mechanical Dimensions (with heat sink) ................................................ 8

 

Mechanical Dimensions (mounts) ........................................................... 9

 

Connector Layout .................................................................................... 10

 

Front connectors.................................................................................... 11

 

Bottom Connectors................................................................................ 17

 

Status Displays ........................................................................................ 18

 

Sigmatek Components............................................................................ 20

 

S-IPC Status ............................................................................................. 21

 

Exchanging the CompactFlash Card..................................................... 24

 

Exchanging the Battery .......................................................................... 25

 

Buffer Battery........................................................................................... 26

 

Exchanging the Fan ................................................................................ 27

 

Mounting PCI Cards ................................................................................ 28

 

Exchanging the Drive unit ...................................................................... 30

 

Cooling ..................................................................................................... 31

 

Mounting Instructions............................................................................. 31

 

Wiring Guidelines .................................................................................... 32

 

1. Earth Connection............................................................................... 32

 

2. Shielding............................................................................................ 33

 

3. ESD Protection .................................................................................. 33

 

4. DIAS Bus Termination....................................................................... 34

 

5. DIAS bus connection to C-DIAS modules......................................... 34

 

6. Connecting DIAS Modules ................................................................ 35

 

7. CAN Bus Termination........................................................................ 36

 

8. USB Interface Connections ............................................................... 37

 

9. RS485 Bus Termination .................................................................... 38

 

Pictures of the S-IPC ............................................................................... 39

 

Summary of Contents for S-IPC











































Reviews:

No comments