SIGMATEK S-IPC, Manual, Page: 26 / 42

S-IPC INTEL
®
ATOM DUAL CORE
Page 26 21.02.2014
The battery should only be exchanged when the S-IPC is off.
The battery must be installed with the + POLE forward. The + POLE is visible on the battery
when installed, the smaller – POLE is below in the battery socket.
CAUTION:
The battery can only be changed when the IPC is off! After the +24 V supply is removed,
the battery is buffered for approximately 5 minutes (via ELKO). The battery must be
changed within this period or data loss occurs.
ATTENTION:
La pile ne doit être changée que si le S-IPC est éteint! Après avoir débranché l'alimentation
+24 V, la pile est tamponnée pendant 5 minutes (via ELKO). La pile doit être remplacée
pendant ce laps de temps sinon les données seront perdues.
Buffer Battery
The exchangeable buffer battery ensures that programs and data in the user memory
(RAM) are preserved in the absence of a supply voltage. A lithium battery is installed at the
manufacturer.
The battery has enough capacity to preserve data in the absence of a supply voltage for up
to 3 years.
We recommend however, that the battery be replaced annually to ensure optimal perform-
ance.
Battery order number: 01-690-028
MANUFACTURER TYPE DATA
Lithium battery RENATA CR2032 3 V
Use only batteries from RENATA with the number CR2032! With any other batter the
danger of fire or explosion exists!
N'utilisez que des piles RENATA CR2032! Avec d'autres piles, un risque d'incendie
ou d'explosion existe!