SIGMATEK DIAS-DRIVE 210-23, Manual, Page: 27 / 91

DIAS-DRIVE 210-23
30.03.2021 Page 27
2.2.4
Connector Layout
All connections to the servo amplifier are plug connectors (except: grounding bolts). With
this method, the cable connection is simplified and the amplifier can be more easily ex-
changed. In addition, the option is provided to produce prefabricated cable sets for high
machine volumes.
The following is the technical data for the applicable connectors:
Connectors Type
Allowable cross sec-
tion
Max. tightening
torque
X1A
Phoenix MSTB 2.5
HC/3-ST
1-2.5 mm² (14-18 AWG) 0.3 Nm (2.25 inch lb)
X1B
Phoenix PC5/8-ST2-
7,62
1-4 mm² (12-18 AWG) 1.3 Nm (12 inch lb)
X3, X5
Phoenix PC5/6-ST2-
7,62
1-2.5 mm² (12-18 AWG) 1.3 Nm (12 inch lb)
X6, X8
D-Sub 25 with metal
housing 0.25-0.5 mm² (21-24
AWG)
Soldered or clamped
Grounding bolts M5 10 mm² (8 AWG) 3.5 Nm (31 inch lb)
2.2.5 Cable Types
According to EN 60204 or AWG: No. 210-16 of the NEC, column 60° C or 75° C is recom-
mended:
Signal Cable rating
Alternating current Maximum 4 mm² (12 AWG) 600 V,105° C (221° F)
Intermediate circuit
voltage
Maximum 4 mm² (12 AWG)
1000 V,105° C (221°
F)
Brake resistance 2.5 mm² (14 AWG)
1000 V,105° C (221°
F)
Motor cable
Maximum 2.5 mm² (14 AWG), shielded, max. 25
m, cable capacitance <150 pF/m
600 V,105° C (221° F)
Stop brake
Min. 0.75 mm² (18 AWG), component of the
motor cable, shielded separately, monitor voltage
loss
600 V,105° C (221° F)
Resolver Feedback with
thermo contacts 4x2x0.25 mm² (24 AWG) twisted pair, shielded, max. 25 m, cable capaci-
tance <120pF/m
EnDAT
®
Signal encoder
7x2x0.25 mm² (24 AWG) twisted pair, shielded, max. 25 m, cable capaci-
tance <120 pF/m
+24 V and +24 V-BR
supply
Maximal 2.5 mm² (14 AWG), (check voltage loss)
Note: Use 60/75 °C Copper conductors only!