SIGMATEK DIAS-DRIVE 210-23, Manual, Page: 14 / 91

DIAS-DRIVE 210-23
Page 14 30.03.2021
DIAS-Drive Concept
•
1 and 3-axis amplifiers to reduce machine costs. 3-axis amplifiers
have advantages through components savings
•
Auto-range function to optimize the resolution of the actual current of
10 A axes, in various configurations.
•
Two different mounting options.
- On a mounting plate in the control cabinet
Through-hole technology
•
Large input voltage range; 3 x 230VAC-
10% … 3 x 10%
powered by TN or TT supplies with grounded neutral lines and a max-
imum symmetrical current of 5000 Aeff.
•
TT supplies without grounded neutral wires require additional
measures.
•
Load circuit for limiting the maximum load current in the electrical
torque.
•
Fuse installed by user (phase failure is monitored by the amplifier)
•
1-phase operation is possible, i.e. initial start-up
•
24 V auxiliary supply, galvanically isolated for independent power.
•
Separate 24 Volt connection to power the holding brakes.
•
Noise filter for the main, 24V auxiliary and holding brake supplies,
class A (industrial use)
•
Housing with connection for the cable shielding
•
Protective functions against:
- Under or over voltage in the intermediate circuit.
-
Several short circuit conditions
- Phase error in the main supply
-
Brake resistance over heating
- Over temperature (heat sink, environment and motor)