SIGMATEK DIAS-DRIVE 210-23, Manual, Page: 10 / 91

DIAS-DRIVE 210-23
Page 10 30.03.2021
1.6 Designated Use
The servo amplifier from SIGMATEK GmbH & Co KG was designed and produced with
state of the art technology. The product was tested for reliability before delivery. It is an
installed component for electrical systems and can only be operated as an integral part.
Before installation, the following conditions for designated use must be met:
•
Each user of the product must read and understand the safety instructions for
designated and non-designated use.
•
The machine manufacture must perform a safety analysis of the machine in or-
der to ensure that no injury or damage is caused to personnel and equipment by
unexpected movements.
•
The servo amplifier must be operated under the assembly and installation condi-
tions described in this document. The environmental conditions (temperature,
protection class, humidity, voltage supply, EMI and mounting position) must be
especially observed.
•
The amplifier can only be operated in a control cabinet.
•
The Servo amplifier must be operated in the original condition without any me-
chanical or electrical changes.
•
Mechanical or electrical defects or defective servo amplifiers may be not be
mounted or operated.
•
The servo amplifier is provided for the control of synchronous servo, linear and
torque motors, as well as frequency, torque, speed or position control of asyn-
chronous motors.
•
The specified rated voltage of the motor must be at least as high as the power
supply voltage of the servo amplifier (230V, 400V or 480V).
•
Only motors with star-connection may be used.
•
This product can lead to EMI disruptions in residential areas. In such a case, the
user must take additional filtering measures.