SIGMATEK DC 061-1, Manual

Page: 13 / 47

S-DIAS AXIS MODULE DC 061-1
23.08.2019 Page 11
2.6 Electrical Requirements
Power 24 V (X4) +18-30 V, Class 2
(1)
Current consumption of the
+24 V supply load-dependent (holding brake)
Supply voltage motor (X2) +18-55 V
(2)
Switching threshold for motor
voltage monitor minimum 18 V maximum 65 V
Current consumption of motor
supply load-dependent (motor)
Voltage supply from S-DIAS bus +24 V
Current consumption on the
S-DIAS bus (+24 V supply) typically 70 mA maximum 80 mA
(1)
For USA and Canada:
The supply (X4) must be limited to:
a) max. 5 A at voltages from 0-20 V DC, or
b) 100 W at voltages from 20-60 V DC
The limiting component (e.g. transformer, power supply or fuse) must be certified by
an NRTL (Nationally Recognized Testing Laboratory).
(2)
Pour les États-Unis et le Canada:
L’alimentation (X4) doit être limitée à:
a) max. 5 A pour des tensions de 0-20 V DC, ou
b) 100 W pour des tensions de 20-60 V DC
Le composant imposant la limite (par exemple, transformateur, alimentation élec-
trique ou fusible) doit être certifié par un NRTL (National Recognized Testing Labora-
tory, par exemple, UL).
(2)
The motor supply (X2) must be connected with an intermediate circuit capacitance
appropriate for the application (at least 2000 µF/100 V).