SIGMATEK BWH, Configuration

Page: 50 / 67

HGW-BWH CONFIGURATION
9 Configuring the Device
With an active online connection, open the “File Commander” to make the necessary changes
to the files.
9.1 File Structure and Paths
The following files must be modified to create a network connection or individualize the access
point.
Network Mode File: Function
Accesspoint C:\autoexec.lsl IP settings and WLAN configuration
C:\lslsys\rsdbd.conf Access point configuration of the network
Client C:\autoexec.lsl IP settings and WLAN configuration
C:\lslsys\wireless.conf WLAN network settings for IP 10
C:\lslsys\wireless2.conf WLAN network settings for IP 11
INFORMATION
In the RSDB module (2 WLAN networks simultaneously), IP 10 is for the 5
GHz WLAN and IP 11 for the 2.4 GHz Network.
9.1.1 WLAN and IP Parameters in the Autoexec.lsl
Parameters Description
WLANAP 10 starts a 5 GHz access point
WLANAP 11 Starts a 2.4 GHz access point
WLANAP 10 11 starts 2 access points (2.4 GHz and 5 GHz)
SET IP 10 HOSTADDR xxx.xxx.xxx.xxx Sets the IP for the interface 10 / 5 GHz network
SET IP 11 HOSTADDR xxx.xxx.xxx.xxx Sets the IP for the interface 11 / 2.4 GHz network
SET IP 10 SUBNET xxx.xxx.xxx.xxx Sets the subnet mask of the IP 10 interface
SET IP 11 SUBNET xxx.xxx.xxx.xxx Sets the subnet mask of the IP 11 interface
9.1.2 File Structure and Parameters rsdbd.conf
The rsdbd.conf is the central file for configuring the access points. It contains all relevant
settings.
Page 48 17.05.2022