BWH 001
WLAN HGW BASE STATION
Page 38
02.10.2018
The actual time-out configured in the SCP must be included in your risk
assessment!
9.3
Testing the Operating Area
9.4
Operation
The BWH 001 base station needs no special handling. It is ready for operation as soon as
power is supplied and the application is started.
The process for coupling the operating panel can be found in chapter 9.4.1.
The meaning of the LED displays is described in chapter 6.4.
The IP addresses are configured using LASAL.
The BWH is coupled via the operating panel.
Please note that if in a handheld operating panel mounted in the BWH, certain functions may
be limited or it may have no function at all (e.g. key switch, confirmation switch...).
9.4.1
Coupling the Operating Panel
To couple the operating panel, a functioning WLAN connection is required.
As soon as the operator is located in the operational range of the base station or machine
with the HGW, the operating panel can be coupled with the machine. For this purpose, see
the documentation of the corresponding class.
If the operating panel has Safety functions and the base station is coupled with a safety-
related control, it is indicated via the activated 7-segment display which shows the machine
number.
WARNING
To avoid faulty operation, an active operating panel can only be mounted in
the corresponding base station.
Pour éviter un fonctionnement défectueux, un panneau de commande actif
ne peut être monté que sur la station de base correspondante.
CAUTION
Test the function in the operating area. Ensure the operating panel can con-
trol the machine throughout the entire operating area. Perform this test using
an HGW.
Tester la fonction dans la zone d'utilisation. S'assurer que le panneau de
commande peut commander la machine dans toute la zone de travail. Effec-
tuer ce test à l'aide d'une HGW.