SIGMATEK BWH 001 Technical Manual Download Page 37 | Manualshive

Page: 37 / 50

SIGMATEK BWH 001 Technical Manual Download Page 37

WLAN HGW BASE STATION

BWH 001

02.10.2018

Page 35

8.2.5

Placing the Installation Number

Place a unique, 2-digit number on the installation over which the handheld operating panel
should be coupled with the machine.
This number can only occur once in the machine park. Otherwise, the operating panel could
be unintentionally coupled with a non-participating machine and lead to confusion.
Ensure the number is placed visibly.

Note the unique number assignment in the system plan.

8.3

Mounting Help

For mounting, a drill template is available for download. In addition to the boreholes, it also
contains the necessary space for the mounted HGW around the base station.

8.4

Wiring

The base station BWH 001 is connected via the M12 connector.
The connector socket is documented in chapter 6.1.1.

1) Turn off the current supply.
2) Install the wiring. Ensure the strands are equipped with ferrules and the shielding is

connected (see 8.4.1).

3) Turn the supply on again.

For the dimensions of the wiring, the power loss / voltage drop in the supply
lines must be taken into consideration. The voltage to the base station must
be within the specified limits.

«
...
35
36
37
38
39
...
»

Summary of Contents for BWH 001



















































Reviews:

No comments