WLAN HGW BASE STATION
BWH 001
02.10.2018
Page 33
The handheld operating panel can be mounted in the base station, as well as used wirelessly
within the signal range. See chapters 9.4 Operation.
Do not expose the BWH to extreme environmental conditions such as heat,
humidity, strong magnetic fields, vibration or dust.
The base station should be mounted vertically or slightly inclined to the rear
in order to prevent the HGW from falling out of the base station.
Ensure that the base station antennas are not shielded by metallic objects, as this can restrict
the functional range.
When mounting the base station, ensure that the requirements for the an-
tenna positions (dead spots), as well as operability (accessibility of the emer-
gency stop) are met.
CAUTION
Mount the base station so that neither the display, emergency stop switch,
nor the signal light is exposed to direct sunlight. The display may otherwise
be unreadable, or the status of the emergency stop switch could be falsely
interpreted.
Montez la base de telle sorte que ni l'écran, ni l'interrupteur d'arrêt d'urgence,
ni la lampe témoin ne soient exposés à la lumière directe du soleil. Sinon
l'affichage peut être illisible ou l'état de l'interrupteur d'arrêt d'urgence peut
être mal interprété.