BWH 001
WLAN HGW BASE STATION
Page 32
02.10.2018
8
Assembly/Installation
8.1
Conditions
The following conditions must be met during assembly/installation:
•
Do not install the base station/ handheld operating panel in a damp environment.
•
The base station must be mounted near the equipment to control.
•
If several units are placed in the immediate vicinity, the base station must be mounted in
such a way that a clear optical assignment to the respective unit is visible.
•
When mounting the base station on uneven surfaces, ensure that the base station is not
subjected to torsion. Ensure that the base station is level.
It is also important to note that ...
•
the base station is mounted so that it is possible to operate the HGW when properly
hung.
•
the base station is connected with the function ground via the cable shielding.
•
removing the HGW should not be restricted.
•
the signal range should be configured so that the handheld operating panel functions
error-free throughout the entire operation area.
•
the emergency stop should also be easily accessible when the panel is mounted.
•
the HGW is placed, so that reflections on the display are largely avoided.
•
the base station should be mounted at a height that ensures the user has an optimal
view of the HGW display and ergonomic operation of the device when mounted on a
vertical surface.
•
to secure the base station, use 3 M4x40 oval head screws with a maximum head diam-
eter of 7.8 mm. the torque cannot exceed 2 Nm.
•
the antennae are not covered or damaged.