BWH 001
WLAN HGW BASE STATION
Page 14
02.10.2018
3.2
Technical Guidelines
WARNING
The HGW and BWH form a communications unit, which must be configured
by trained personnel. Among other things, careful allocation of the wireless
channels must be ensured. Complete, seamless availability must be guaran-
teed over the entire area of operation to ensure that no dead spots exist at
any location in the area of operation.
Le HGW et le BWH constituent une unité de communication qui doit être
configurée par un personnel qualifié. Entre autres, il faut s'assurer que l'attri-
bution des canaux sans fil est faite avec soin. Une disponibilité complète et
sans faille doit être garantie sur l'ensemble de la zone d'exploitation afin de
s'assurer qu'il n'y a pas de zones mortes en tout point de la zone d'exploita-
tion.
The electrical connections cannot be removed while voltage is applied. Be-
fore removing connections, a controlled shutdown of the machine must be
performed and the supply disconnected.
After shutdown or disconnection of the voltage supply, a wait-time of 5
minutes is required before voltage conducting components can be touched
or connectors removed.
The machine manufacturer is responsible for ensuring the correct handling
of modules and if necessary, for taking organizational measures to secure
access.
3.3
Guidelines
The BWH was constructed in compliance with the following European Union guidelines.
2014/35/EU
Low-voltage guideline
2014/30/EU
EMC Guideline
2014/53/EU
Wireless Device Guideline
2011/65/EU
RoHS Guideline