SIGMATEK 12-246-011, Operating Manual, Page: 27 / 50

ACCESPOINT WLAN HGW BWH 011
27.11.2020 Page 25
6.3.2 Signal Light /Coupling Light
The signal light is used to visually assist with the coupling of an HGW.
•
An LED can be connected to the X5 connector. The internal 330 Ω resistor limits the
current for the LED. If the LED needs a lower current, an additional external resistor can
connected in series.
•
The signal light can be implemented through an external control (e.g. CP 111 with TO
161).
•
Ensure that the wire routing is as short as possible.
Status Function
off Coupling process inactive
blinking Coupling process active