ACCESPOINT WLAN HGW
BWH 011
27.11.2020
Page 17
The devices can only be used in the country designated or preconfigured for
this purpose, as the maximum permitted transmission power can greatly dif-
fer.
Please note that DFS/TPC is inactive on our devices and we therefore do not
recommend the corresponding channels!
Non-compliance with these specifications can result in legal consequences,
for which SIGMATEK accepts no liability!
Already during the planning stage, caution must be taken to ensure that the
radio channels are configured so that interference with other products is pre-
vented.
(1)
During configuration, the document “WLAN Configuration” should be used.
All channels currently supported by the hard- and software described therein.
CAUTION
Only antennae approved by SIGMATEK can be used. See chapter 14.3 An-
tennae.
Regularly check the screw fitting for the antennae. If necessary, manually
tighten them or use a torque wrench (1 Nm) for RP-SMA sockets.
4.5
Miscellaneous
Article number
12-246-011
Hardware version
1.x
Approvals
CE