BWH 011
WLAN HGW BASE STATION
Page 36
27.11.2020
9.2
Check List
9.2.1
Check Contents of Delivery
Ensure that the contents of the delivery are complete and intact. See chapter 1.3Contents of
Delivery for more information.
On receipt and before initial use, check the device for damage. If the device
is damaged, contact our customer service and do not install the device in
your system.
Damaged components can disrupt or damage the system.
9.2.2
Determining Antenna Positions
CAUTION
To ensure signal range, the position of the base station must be measured
and defined by trained personnel.
9.2.3
Placing the Installation Number
Place a unique, 2-digit number on the installation over which the handheld operating panel
should be coupled with the machine.
This number can only occur once in the machine park. Otherwise, the operating panel could
be unintentionally coupled with a non-participating machine and lead to confusion.
Ensure the number is placed visibly.
Note the unique number assignment in the system plan.