Refrigerated Centrifuge Sigma 3-30KS
Index
Version 07/2012, Rev. 1.22 of 02/06/2021
• sb
89 / 93
Translation of the original operating manual, part no. 0701302
12 Index
A
Acceleration ............................................... 42
Acceleration curve ......................... 42, 53, 78
Acceleration curve (changing) .................... 53
Acceleration curve (creating) ..................... 53
Accessories, cleaning and care .................. 65
Acid................................................ 23, 64, 66
Acoustic signal ........................................... 60
Activating the help function ........................ 54
Adapters .............................................. 36, 65
Alkaline solutions ........................... 23, 64, 66
Ambient conditions ..................................... 75
Ambient temperature ................................. 75
Anodised coating ....................................... 65
Application examples ................................. 14
Autoclaving ................................................ 69
Automatic lid opening function ................... 50
Automatic program rotation ........................ 58
Automatic rotor identification ...................... 41
B
Blocking a function ..................................... 49
Brake ......................................................... 42
Brakeless deceleration ............................... 42
Brakeless deceleration from set speed ...... 48
Brief mains power failure ............................ 60
Bucket ........................................................ 36
Buckets, cleaning and care ........................ 66
Buzzer/signal ............................................. 52
C
Capacity ..................................................... 74
Carrier ........................................................ 36
Carrier systems .......................................... 36
Carriers, cleaning and care ........................ 66
Centrifugation monitoring ........................... 47
Centrifugation of infectious, toxic, radioactive,
or pathogenic substances ....................... 22
Centrifugation principle .............................. 14
Centrifugation with low capacity ................. 35
Centrifugation with vessels of various sizes 34
Centrifuge cannot be started ...................... 60
Centrifuge decelerates during operation .... 60
Centrifuge is inclined .................................. 60
Centrifuge was moved during run .............. 60
Centrifuge, cleaning and care .................... 64
Centrifuges
- definition ................................................. 9
CE-Zeichen gemäß Richtlinie 2006/42/EG . 16
Changes in colour ...................................... 69
Changes in structure .................................. 69
Changing an acceleration curve ................. 53
Changing the code ..................................... 49
Chemical and biological safety ................... 22
Chemical resistance of plastic .................... 66
China RoHS 2
– Declaration of conformity . 87
Cleaning agents ......................................... 68
Cleaning the bores of angle rotors ............. 65
Cleaning the centrifuge .............................. 64
Closing the lid ...................................... 21, 31
CO
2
equivalent ........................................... 74
Communication error ................................. 62
Condensation ............................................. 29
Condenser dirty ......................................... 60
Condenser, cleaning and care ................... 65
Contamination ...................................... 22, 65
Continuous heat resistance ........................ 68
Continuous run .......................................... 40
Contrast (changing) ................................... 55
Control system ........................................... 37
Copyright ................................................... 10
Corrosion ................ 21, 24, 36, 64, 65, 66, 68
Cost estimate ............................................. 71
Cracking .................................................... 65
Cracks ....................................................... 66
Creating an acceleration curve ................... 53
Curve menu ............................................... 53
Customer-provided fuses ........................... 30
Cycles .................................................. 32, 52
D
Damage of the surface ............................... 66
Dangerous goods....................................... 23
Dangerous materials .................................. 68
