Laboratory Centrifuge Sigma 3-16L
Laboratory Centrifuge Sigma 3-16L IVD
6 Using the centrifuge
Version 03/2014, Rev. 2.11 of 11/08/2017
• sb
31 / 79
Translation of the original operating manual, part no. 0700902
Pos : 117 /100 Sig ma/100 BA Z entrif ugen Sig ma (St andardmodul e)/060 Betrieb_Spi nc ontr ol L+S/ Spinc ontrol L (Z ent6) /060- 0030 Spincontr ol L Steuer ung---------------------------------------------- @ 27\ mod_1405319249442_68.doc x @ 192605 @ 2 @ 1
6.3
Control system "Spincontrol L"
Pos : 118 /100 Sig ma/100 BA Z entrif ugen Sig ma (St andardmodul e)/060 Betrieb_Spi nc ontr ol L+S/ Spinc ontrol L (Z ent6) /060- 0030-0011 Bedienoberfläche L ohne T emperatur anzeige @ 27\ mod_1405319251981_68. doc x @ 192633 @ 3 @ 1
6.3.1
User interface
The centrifuge is operated via three buttons with integrated light-emitting
diodes and one function knob. The display is divided into several different
fields. The various functions of the system can be called up by pressing
and turning the function knob.
1
Start key
2
Function knob
3
Display
4
Stop key
5
Lid key
Fig. 9: User interface of the
“Spincontrol L” control system
Display
The centrifuge display has the following display fields:
1
Speed/rcf field
2
Various display fields
(e.g. for rotor, curve,
or program selection)
3
Time field
Fig. 10: Display of the
“Spincontrol L” control system
Pos : 119 /010 Uni vers almodul e/ Seit enwechs el @ 0\ mod_1202116244312_0.doc x @ 105 @ @ 1
