BC1200 SIGMA SPORT BICYCLE COMPUTER
RESET/SET
=
BIKE 1
DISTANCE/DAY
RIDE TIME
AVERAGE SPEED
STOPWATCH
MAX SPEED
STPWATCH
TRIP UP/-DOWN
TOTALODO
CLOCK
=
BIKE 2
The BC1200 is set up to switch back and forth between 2 bicycles. Please make sure the correct bicycle is showing
before you begin your ride.
I. TO SET CLOCK
•
Press bottom button until clock appears at the bottom of the screen.
•
Turn computer over and press and hold the right indented gray set button
•
(S) for 5 seconds or until clock flashes.
•
Press top button until hour is reached.
•
Press bottom button to move to minutes.
•
Press top button until desired number is reached.
•
Press bottom button to move to single minutes.
•
Press top button until desired single minute is reached.
•
Turn computer over and press right indented gray set button (S) for 1 second to set.
II. TO SET MPH/KMH, LANGUAGE, AND WHEEL SIZE 1
•
Make sure computer is on BIKE 1.
•
Press bottom button until CLOCK or TOTALODO is not displaying on screen.
•
Turn computer over and press and hold the indented gray set button for 5 seconds or set language flashes.
•
Press top button to switch select: Deutsch(German), English, Francais(French), Italiano(Italian),
Espanol(Spanish), Svensk(Swedish), or Hollands.
•
Press bottom button to accept & select KMH/MPH.
•
Press top button until your selection is reached.
•
Press bottom button to select & move to wheel size.
•
(Consult chart or figure yourself by measuring from the top of the tire to the ground in inches.) Measurement
X 25.4 x 3.14 / 1.61 = ws ( / is divided by)
•
Press top button to advance numbers.
•
Press bottom button to make 2nd digit flash.
•
Press top button to advance numbers.
•
Press bottom button to make 3rd digit flash.
•
Press top button to advance numbers.
•
Press bottom button to make 4th digit flash.
•
Press top button to advance numbers.
•
Press indented right set button on back for one second to store.
III. TO SET WHEEL SIZE 2
•
Press gray indented l / ll button on back to switch to bike 2.
•
Press bottom button until CLOCK or TOTALODO is not displaying on screen.
•
Press and hold gray indented set button on back for 5 seconds to make ll and first number flash.
•
Press top button to advance numbers.
•
Press bottom button to make 2nd digit flash.
•
Press top button to advance numbers.
•
Press bottom button to make 3rd digit flash.
•
Press top button to advance numbers.
•
Press bottom button to make 4th digit flash.
•
Press top button to advance numbers.
•
Press indented gray set button on back for one second to store.
IV. TO SET TOTALODO (ONLY IF YOU WOULD LIKE TO PROGRAM MILES PREVIOUSLY
RIDDEN)
•
Press bottom button until TOTALODO is showing.(This will program miles previously ridden.)
•
Press gray indented set button on back for 5 seconds to make flash.
•
Press top button to advance numbers and bottom button to move to the next number.
•
Press indented gray set button for 1 second to store.
V. TRIP COUNTER (MOSER GUIDE) TRIP UP – (to count up as normal)
•
Press bottom button until TRIP UP or TRIPDOWN appears.
•
Press top and bottom buttons simultaneously, then release. SET will flash.
•
Press top button to set TRIPUP.
•
Press bottom button to select with first number flashing.
•
Press top button to advance numbers & bottom button to move to next flashing number.
•
Press top and bottom buttons simultaneously to lock in.
VI. TRIP COUNTER (MOSER GUIDE) TRIP DOWN – (to count down to destination)
•
Press bottom button until TRIP UP or TRIPDOWN appears.
•
Press top and bottom buttons simultaneously, then release. SET will flash.
•
Press top button to set TRIPDOWN.
•
Press bottom button to select with first number flashing.
•
Press top button to advance numbers & bottom button to move to next flashing number.
•
Press top and bottom buttons simultaneously to lock in.
VII. VI To Reset modes DIST/DAY, RIDETIME, AVGSPEED, MAXSPEED, or STPWATCH
individually, press bottom button until desired mode is reached. Press the top left button for 2
seconds to reset to zero. Continue to hold top left button to reset all.
DIST/DAY – Will record distance traveled. Reset by pressing top button until RESET DIST/DAY stops flashing.
(automatically resets after 999.99 miles)
RIDETIME – Auto start/stop stopwatch that shows actual time ridden.
AVGSPEED – Shows average speed only when moving. It will continue with previous numbers until reset. Can be
reset by pressing top button until RESET AVGSPEED stops flashing.
↑
Above average speed during the ride.
•
Riding at average speed during the ride.
↓
Below average speed during the ride.
STPWATCH – Stopwatch function can be controlled by pressing top button to start. Press again to stop. Press top
button and hold until RESET STPWATCH stops flashing to reset to zero.
MAXSPEED – Maximum speed reached while riding. Can be reset by pressing top button until RESET MAXSPEED
stops flashing.
CLOCK – Current time.
TOTALODO – Total distance for bike 1 and bike 2 combined .(automatically resets after 99999 miles)