SSG5000A RF Signal Generator User Manua
l
SSG5000A User Manual 44
Pulse Modulation (PULSE)
Pulse Modulation represents the process of modulating an RF carrier signal with a pulse
signal as a modulation signal.
Pulse State
Select
MOD
->
PULSE
->
Pulse State
to turn Pulse on or off.
Pulse Out
Select
MOD
->
PULSE
->
Pulse Out
to turn Pulse Out on or off. The default is off.
⚫
On: Turn on the pulse output function. At this time, the signal source outputs the pulse
signal generated by the internal pulse generator from the
[PULSE IN/OUT]
connector on
the rear panel.
⚫
Off: Turn off the pulse output function.
Note:
When the modulati
on source is “Ext”, the pulse output function will be turned off
automatically.
Pulse Source
Select
MOD
->
PULSE
->
Pulse Source
to set “Int” or “Ext”. The default is “Int”.
1. Int
Use the internal LF generator as the modulation signal source for Pulse Modulation. You
can set Pulse Mode, Pulse Period, and Pulse Width and so on.
2. Ext
Use an externally applied modulation signal. The external signal is input via the
[PULSE
IN/OUT]
connector.
At this time, setting items such as pulse type, pulse period, pulse width, trigger mode, and
pulse output are hidden.