SSG5000A RF Signal Generator User Manua
l
41 SSG5000A User Manual
Phase Modulation (PM)
Enter the PM interface
1. Click the
ANALOG MOD
->
PM
in the main interface to enter the PM interface.
2. Enter the MOD interface via the
MOD
button and switch to the PM modulation page.
The MOD interface displays the AM page by default. You can switch to the PM
modulation page by clicking or sliding left.
PM State
Select
MOD
->
PM
->
PM State
to turn PM on or off.
PM Source
Select
MOD
->
PM
->
PM Source
to set “Int” or “Ext” or “Int + Ext”. The default is “Int”.
1. Int
Use the internal LF generator as the modulation signal source for PM. The PM Shape, PM
deviation and PM rate can be set.
2. Ext