SIGLENT SSA5083A, User Manual, Page: 48 / 260

18
User Manual
Command Format :CALCulate:MARKer:TRCKing[:STATe] OFF|ON|0|1
:CALCulate:MARKer:TRCKing[:STATe]?
Instruction Sets the signal track state
Gets the signal track state
Parameter Type Boolean
Parameter Range OFF|ON|0|1
Return 0|1
Example :CALCulate:MARKer:TRCKing ON
3.1.6 Auto Tune
Automatically search the signal in the full frequency band and adjust the frequency and amplitude
parameters to the best state. One key to perform signal search and automatic parameter setting.
⚫ When this function is enabled, Auto Tune is displayed in the status bar of the screen. After the
automatic search is complete, Auto Tune disappears.
⚫
Reference level, scale size, input attenuation and other parameters may be modified during
automatic search.
Command Format [:SENSe]:FREQuency:TUNE:IMMediate
Instruction Perform auto tune
Parameter Type No parameter
Parameter Range No parameter
Return No return
Example :FREQuency:TUNE:IMMediate
3.2 BW
The bandwidth menu contains the RBW (Resolution Bandwidth), VBW (Video Bandwidth),
average type and filter type. Filter type includes the EMI filter type that enables EMI measurement
controls.
3.2.1 Resolution Bandwidth
Set the resolution bandwidth in order to distinguish between signals which have frequency
components that are near one another.
⚫ Reducing the RBW will increase the frequency resolution, but will also increase the sweep
time dramatically (Sweep Time is affected by a combination of RBW and VBW when the