SIGLENT SSA5083A, User Manual, Page: 156 / 260

126
User Manual
4.7.4 Relative To
“Relative to” is used to measure the delta values of X (Frequency or Time) and Y (Amplitude)
between two markers which can mark on different traces.
After the marker selects “Delta”, the original marker will become the delta measurement marker,
and the related marker of the incrementing sequence number will become the reference “fixed”
marker
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:REFerence 1|2|3|4
:CALCulate:MARKer[1]|2|3|4|5|6|7|8:REFerence?
Instructions Sets/Gets the marker relative to
Parameter type Enumeration
Parameter Range 1|2|3|4|5|6|7|8
Return Enumeration
Example :CALCulate:MARKer1:REFerence 3
4.7.5 Peak->CF
Set the current peak frequency to the center frequency.
4.7.6 Update Peak/Maximum Peak
Searches for
maximum
peaks and marks them with specified cursors.
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum
Instructions Marker searches for maximum peaks and marks them with the specified
marker
(If peak-to-peak value is on, peak-to-peak value search is carried out;
otherwise, single peak value search is carried out)
Example :CALCulate:MARKer4:MAXimum
Command format :CALCulate:MARKer[1]|2|3|4|5|6|7|8:MAXimum:NEXT
Instructions Marker searches for the next peak and marks it with the specified marker
Example :CALCulate:MARKer1:MAXimum:NEXT