SIGLENT SSA5083A, User Manual, Page: 146 / 260

116
User Manual
Example :TRIGger:LEVel:LEVel 0.5 dBm
4.5.2.2
Trigger Delay
Set the trigger delay when PVT is triggered
Command format :TRIGger[:SEQuence]:LEVel:DELay
:TRIGger[:SEQuence]:LEVel:DELay?
Instructions Set the PVT trigger delay
Gets the PVT trigger delay
Parameter type
Float
，
unitks
、
s
、
ms
、
us
、
ps
、
ns
Parameter Range 0~10s
Example :TRIGger[:SEQuence]:LEVel: DELay 2
4.5.3 External
In this mode, an external signal (TTL signal) is input from the [TRIGGER IN] connector at the rear
panel and trigger signals are generated when this signal fulfills the specified trigger edge
condition.
4.5.3.1
Trigger Edge
Set the trigger edge in external trigger to the rising (Pos) or falling (Neg) edge of the pulse.
Command format :TRIGger[:SEQuence]:EXTernal:SLOPe POSitive|NEGative
:TRIGger[:SEQuence]:EXTernal:SLOPe?
Instructions Set the trigger along the falling edge | along the rise
Get trigger edge
Parameter type Enumeration
Parameter Range POSitive
NEGative
Return Enumeration:POS|NEG
Example :TRIGger:EXTernal:SLOPe POSitive
4.5.3.2
Trigger Delay
Set the trigger delay when external trigger is triggered