SIGLENT TECHNOLOGIES SDS2000X-E Series, User Manual, Page: 76 / 222

SIG L ENT
50
SDS2000X-E
User Manual
Sequence Mode
Sequence Mode provides faster data collection, but does not display waveforms during
sampling process. It improves the waveform capture rate, delivering up-to 400,000 wfs/s.
So it can capture the small probability events effectively.
The oscilloscope runs and fills a memory segment for each trigger event and continues to
trigger until memory is filled. After the memory buffer has been filled, it then displays the
waveforms on the screen.
To use the sequence mode, the Horizontal Format must be set to
YT .
Do the following steps to use the sequence mode.
1. Press the
Acquire button on the front panel to enter the ACQUIRE function menu;
2. Press the Sequence softkey to enter the SEQUENCE function menu.
Figure 20 SEQUENCE Function Menu
3. Press the Max Segments softkey; and then turn the Universal Knob to select the
desired value.
Do the following steps to replay the sequence waveform under history mode:
1. Press the
History
softkey to enable HISTORY function.
Figure 21 HISTORY Function Menu